Add New Station Model

NOTE: Only a super admin can create a new station model.

To add a new station model:

1. Click on + ADD NEW STATION MODEL at the top right of the page.
   
2. Upload an image
3. Enter the following mandatory information:
   • Model Name
   • Manufacturer
   • Serial Number
   • Serial Number Model Pattern
   • Vehicle to Grid (V2G)
   • Charging Station Model Protocol
   • Max Power: Charging station power rating for model (e.g., 73 Kw)
   • Grid Connection Type: AC or DC
     • If DC, select default DC voltage (e.g., 50V)
     • If AC, select tha AC electrical current (e.g.,  Biphase 50v)
   • Meter Code: Numeric identifier (e.g., 1, 2, or 3)
   • Plug Type (Note: You can select more than one per plug.)
     • ID Plug type: 1, 2, or 3 per plug
     • Max Power per plug
     • Max Current (e.g., 100A)
     • Min Current (e.g., 50A)
     • Min power es: 50W
     • Plug type name
     • Add more plugs
   • More Units
4. Enter the following advanced parameters:
   • Acronym (e.g., HEARTBT - MTR - AUTOTPR)
   • Type (e.g., boolean, list, etc.)
   • Value (e.g., 60)
   • Units (e.g., seconds)
   • Send Execution (Y/N)
   • Mandatory (Y/N)
   • Visible (Y/N)
   • Changable (Y/N)
   • Description (e.g., interval of KEEPALIVE messages in seconds (0(=off) - 60)
   • Upload File (containing advanced parameters)
5. Enter the following diagnostic parameters:
   • Item CD (ERROR VENDOR CODE) (e.g., JFWE8933)
   • Info CD (e.g., faulted or available)
   • Info Description
   • Item Description (e.g., protection fault - Meter fault)
   • Status (e.g., 1 or 0)
   • Upload File (containing diagnostic parameters)
6. Save as a draft or save and publish