Release Version 1.0.30 

Release date: 04-Jan-2021 

Operating System: Gecko OS 4.2.6 

Compatible Hardware: 

Next Generation North American JuiceBox and JuiceBox Pro 32, 40 and 48 with Type 1 J1772 output plug manufactured starting in December 2019. Supported hardware includes combinations of WiFi (IEEE 801.11b/g/n, 2.4 GHz), Bluetooth, MiFare 13.56MHz RFID reader, CAT-1 LTE with support for over-the-air (OTA) update through WiFi and LTE. 

Next Generation European and LatAm 3 Phase and 1 Phase JuiceBox Basic with Type 2 IEC output plug manufactured starting in Sep 2020. Supported hardware includes combinations of WiFi (IEEE 801.11b/g/n, 2.4 GHz), Bluetooth, MiFare 13.56MHz RFID reader with support for OTA update through WiFi. 

JuicePedestal Unattended Payment Terminal (UPT) with OTA update through the embedded CAT-1 LTE modem. 

New Features 

The JuiceBox WiFi can be used with WPA3 Access Points that support WPA3/2 Transitional/Mixed Mode. 

LED scheme has been enhanced: 

  • When a device connects to the internal JuiceBox Access Point in Setup Mode, the JuiceBox LED transitions from flashing blue to solid blue and beeps once. 
  • If the Electric Vehicle is no longer drawing power, the LED transitions from flashing green (charging) to solid green (no longer charging). 

The JuiceBox web interface (SETUP.COM) used by commercial JuiceBox users now has the latest Enel X colors and branding. 

Resolved Issues 


Known Issues 

Power measurements across two phases (for example, on Isolated Terra power grids) are not reported correctly. 

When firmware is updated OTA through LTE, occasionally WiFi credentials are lost on the JuiceBox. 

Known Limitations 

Wi-Fi configuration through Bluetooth not yet supported in firmware or mobile app. Bluetooth device setup will be supported in a future release. 

European-style over-current protection is not enabled on JuiceBoxes sold in North America. Over-current protection is not required by US/North American standards.