Release date: 11-Dec-2020
Operating System: Gecko OS 4.2.5
Compatible Hardware:
Next Generation North American JuiceBox and JuiceBox Pro 32, 40 and 48 with Type 1 J1772 output plug manufactured starting in December 2019. Supported hardware includes combinations of WiFi (IEEE 801.11b/g/n, 2.4 GHz), Bluetooth, MiFare 13.56 MHz RFID reader, CAT-1 LTE with support for over-the-air (OTA) update through WiFi and LTE.
Next Generation European and LatAm 3 Phase and 1 Phase JuiceBox Basic with Type 2 IEC output plug manufactured starting in Sep 2020. Supported hardware includes combinations of WiFi (IEEE 801.11b/g/n, 2.4 GHz), Bluetooth, MiFare 13.56 MHz RFID reader with support for OTA update through WiFi.
JuicePedestal Unattended Payment Terminal (UPT) with OTA update through the embedded CAT-1 LTE modem.
New Features
None
Resolved Issues
A longer delay has been added in firmware to allow for the relay to switch to correct an intermittent issue with erroneous relay stuck errors.
Known Issues
Power measurements across two phases (for example, on Isolated Terra power grids) are not reported correctly.
When firmware is updated OTA through LTE, occasionally WiFi credentials are lost on the JuiceBox.
Known Limitations
Wi-Fi configuration through Bluetooth not yet supported in firmware or mobile app. Bluetooth device setup will be supported in a future release.
European-style over-current protection is not enabled on JuiceBoxes sold in North America. Over-current protection is not required by US/North American standards.