Release date: 19-Mar-2021
Operating System: Gecko OS 4.2.6
Next Generation North American JuiceBox and JuiceBox Pro 32, 40 and 48 with Type 1 J1772 output plug manufactured starting in December 2019. Supported hardware includes combinations of WiFi (IEEE 801.11b/g/n, 2.4 GHz), Bluetooth, MiFare 13.56 MHz RFID reader, CAT-1 LTE with support for over-the-air (OTA) update through WiFi and LTE.
Next Generation European and LatAm 3 Phase and 1 Phase JuiceBox Basic with Type 2 IEC output plug manufactured starting in Sep 2020. Supported hardware includes combinations of WiFi (IEEE 801.11b/g/n, 2.4 GHz), Bluetooth, MiFare 13.56 MHz RFID reader with support for OTA update through WiFi.
JuicePedestal Unattended Payment Terminal (UPT) with OTA update through the embedded CAT-1 LTE modem.
The administrator for a UPT device can now perform an immediate configuration change on the UPT through the Cloud Management interface. This is in addition to the periodic configuration change refresh performed by the UPT.
The UPT charging session information screen displays the instantaneous charging power in kW for the active charging session.
An RFID tag can be used to initiate a private charging session on a JuiceBox connected to a UPT.
Power measurements across two phases (for example, on Isolated Terra power grids) are not reported correctly.
Wi-Fi configuration through Bluetooth not yet supported in firmware or mobile app. Bluetooth device setup will be supported in a future release.
European-style over-current protection is not enabled on JuiceBoxes sold in North America. Over-current protection is not required by US/North American standards.