Wi-Fi Setup - Mobile Device
For best results, perform this procedure while standing within 5 ft (1.6m) of the JuiceBox.
- Download and install the “Enel X Way” app onto your mobile device.
Video walkthrough of this section
- Log into the Enel X Way app. If you do not have an account, create one.
- Select Start.
- Select Connect Now.
- Have the Wi-Fi network password ready, then disconnect power from the JuiceBox. In the app, select Next.
- Connect power to the JuiceBox. In the app, select Next.
NOTE: After powering the JuiceBox, steps 7 through 10 must be completed within 2 minutes.
- Navigate to the Wi-Fi settings on your mobile device. Connect to the "JuiceBox-###" or "JuiceNet-###" Wi-Fi network. If the network requires a password, use the password "GoElectric" (case-sensitive).
NOTE: The actual name of the network varies by device, such as "JuiceBox-123".
- Return to the EV JuiceNet app.
- In the EV JuiceNet app, select the preferred local Wi-Fi network.
- Enter the Wi-Fi network password, if necessary, then select Done / Connect JuiceNet device to Wi-Fi.
NOTE: If prompted, verify the password, then select Done / Password is correct.
The app connects the JuiceBox to the Wi-Fi network.
- After the app confirms that Wi-Fi setup is complete, select Next to continue to the app home screen.
NOTE: After connecting, JuiceBox checks its firmware version and performs any necessary updates. Wait 10 minutes before plugging in a vehicle.
NOTE: Customize your experience by following the onscreen app instructions to select your vehicle and charging profile, or navigate to the JuiceNet dashboard on a personal computer at https://home.juice.net